Linksys Velop has different lights on it. Each light has some meaning. These lights on the Linksys router indicate the current status of the device. If the lights show unusual behavior, then you can understand that there is something wrong with your device. You will straight away try fixing the error that is causing the trouble. One such unusual light behavior on the Linksys router is seeing orange light. We are going to discuss the Linksys orange light in this article. We shall talk about what it mean and how you can fix the issue to get rid of the orange light. Here we begin.
Linksys Velop Orange Light: Meaning
If you encounter an orange light on your Linksys router, understand that there is an issue with the internet connection. Generally orange light on the Linksys router happens when there is a weak or intermittent internet connection to the device. Now that we know what it implies to have an orange light on the Linksys router, let’s head toward fixing it.
Linksys Velop Orange Light [Fixed]
-
Reboot Linksys Router
Commence troubleshooting the orange light issue by rebooting the Linksys Velop. A simple reboot process has the ability to kick out any temporary technical hitches with the device. Thus, before you try any hardcore troubleshooting, consider restarting your device. To reboot, here is what you need to do:
- Turn the Linksys Velop power button off.
- Unplug it from the wall electrical outlet.
- Remove any connected cable from it.
- Leave it like this for a while.
- Now, connect every cable as it was previously connected.
- Plug the Linksys Velop back into the power outlet.
- Turn the power button on.
This completes the reboot process. Has the orange light issue fixed now? No luck? Proceed further to the next hack.
-
Relocate the Linksys Router
It is possible that the Linksys router is placed at an inappropriate location. Thus consider relocating your router to a proper location now. By a proper location we mean this:
- The distance between the router and the modem should not be more. The devices should be able to communicate smoothly.
- While bringing the devices closer, make sure that you are not placing them too close, as the signals will clash.
- Apart from distance, make sure to avoid placing the router in an open area. Placing it in an enclosed area will not do much good.
-
Check Cables
Next check the cable that is connecting your Linksys router to the modem. Perhaps it is damaged and so the router is unable to access stable internet. Replace the Ethernet cable right away and make sure you are inserting it correctly in the respective Ethernet ports. Once done check if the issue has been resolved or not.
-
Do Away with WiFi Interference
It is possible that your Linksys Velop is sharing location with other devices or appliances that can cause interference with its WiFi signal. Thus makes sure that you are placing your Linksys router away from microwave ovens, smart TVs, refrigerators, baby monitors, Bluetooth speakers, etc.
-
Avoid Signal Obstruction
Do you know how the WiFi network can be obstructed? If you have concrete walls, heavy mirrors or other reflexive surfaces near the Linksys router, then the signal gets blocked or obstructed. Moreover, placing the device behind cupboards or metal cabinets can also obstruct the network. Thus make sure you are not making any such mistake.
-
Contact ISP
If you see that the above-mentioned tricks have not been able to fix the orange light issue, then there is a possibility then there is a network issue from the ISP end. Try contacting them to confirm and get the issue resolved from their end. If the issue has yet not been resolved then there is one final resort that you can follow.
-
Reset Linksys Router
Finally, it is time to reset your Linksys device to get the issue fixed. This will delete customized data from the device. The good news is that it will also delete the issue that is causing the orange light on the Linksys router. Thus, press the Reset button on it and the reset is done. As soon as the Linksys router boots up after resetting, you will have to login to Linksys router to access the admin page to reconfigure it. Do the same and get the setup process completed.
Wrap Up
We are pretty sure that the above-given troubleshooting hacks have been able to help come out of the mess with your Linksys Velop. With this hope, here we end this troubleshooting guide.
