Not able to find the extender after performing the Netgear WiFi range extender EX5000 Setup and wondering how to fix it? Well, this issue can occur due to numerous reasons. Today in this post we are going to discuss all of them in detail so that you can enjoy high-speed internet.
Well, we have prepared a useful and helpful guide in which you will learn how to identify the root of the issue and how to tackle it as soon as possible.
If your Netgear extender is not showing up, you need to ensure one thing first: the extender is broadcasting its SSID. If not then you need to find out the cause behind this issue and solve it.
First, we discuss the factor that drags you to face the Netgear extender not found issue, so that you can fix it on your own.
Reasons Netgear Extender Not Found
Numerous reasons cause this issue. Let’s take a leap and discuss the causes of the issue.
Reason: 1 Power Issue
You can face this issue if your extender is not connected to a constant and reliable power source. It could be stuck in a restart loop, thus not showing in the network list.
Reason: 2 Incorrect IP Address
There is a possibility that you put the wrong IP as a result network not recognized in the network list.
Reason: 3 Outdated Firmware
If your device runs into outdated firmware then it could be the reason behind this issue, because the outdated versions of firmware. Do not support some network features as result create issues like an extender not being found.
Reason: 4 SSID Not Enabled
You need to make sure that you enable the SSID broadcast or network channel on which the WiFi is set up, if not then your extender not be shown in the network list.
Thus, these are the causes of why your extender is not found in the network list. You need to take these possibilities in your mind and solve the issue.
Now, we give you some effective and suitable solutions that you can follow to resolve the problem in less time.
Hacks Netgear Extender Not Found
Before performing any further solution, have you tried rebooting your Netgear extender? If not, then we suggest you reboot your device first because some issues resolve by restarting the device.
If you don’t know the process of reboot, then we recommend you follow the outlined steps:
-
Initially, power off your Netgear extender and remove the power cord from the wall outlet.
-
Now, give some time to the Netgear extender for recovery.
-
Power on your extender again by putting into the power socket.
-
Don’t forget to hit the turn-on button.
Thus, your extender is successfully rebooted. Now, you can check the issue to make sure the extender is showing in the network list or not. If not, then follow the further troubleshooting tips.
Also Read About
How to Setup Netgear Powerline 1200
Hack: 1 Update Netgear Extender Firmware
This issue can often occur if you forget to update your firmware. The old version of firmware corrupts the internal files and does not support some network features of the device. Thus, to solve the issue we recommend you update your firmware as soon as you can and enjoy the internet in no time.
Hack: 2 Reset Your Netgear Extender
You can also perform the reset process if no hack assists you. You can set your extender to its factory settings. To do this, you can take the help of the user manual, which comes with your device. Moreover, you can also know about what is smart connect Netgear for future reference.
Thus, these are the steps that you need to perform to tackle the issue. Once you perform these solutions. You will be able to see your extender in the network name.
