Is the LED on your Linksys range extender blinking yellow? Are you getting “Linksys extender yellow light” issue after performing Linksys range extender setup process in a proper way? Need not to worry! This is the common issue experienced by 2nd Linksys extender user. Here, we have pen down the topmost fixes following which troubleshooting “Linksys extender yellow light” issue will be as easy as counting 123 for you. Let’s start!
Fix Linksys Extender Yellow Light Issue
Reboot Your Linksys Extender
Technical glitches will surely force you to experience “Linksys extender yellow light” issue. No worries! We have a solution that can help you get rid of technical glitches i.e. rebooting Linksys extender. Here’s how you can do that in a hassle-free way:
Step 1: First of all, power off your Linksys range extender and unplug it from the electrical outlet.
Step 2: After unplugging the extender, wait for a few seconds.
Step 3: Plug your Linksys range extender back into the wall socket. Turn it on.
Step 4: Connect your Linksys device and router using an Ethernet source.
Here’s to hope that after rebooting your Linksys range extender, the issue you are currently getting is now fixed? If not, then don’t think much to try the next hack highlighted below.
Perform Linksys Extender Firmware Update
Every Linksys range extender comes embedded with a firmware version. Hope yours has come with the same as well? If yes, we suggest you update it timely. The reason is, outdated firmware version is the topmost reason behind getting “Linksys extender yellow light” issue. Thus, make sure you update it right away via extender.linksys.com.
Check the Ethernet Connection
The third tip that you have to apply to get rid of “Linksys extender yellow light” issue is to check the Ethernet cable you have used for connecting your Linksys range extender and router. Make sure that the cable is not worn out or damaged, is it? If yes, then we suggest you replace it as soon as possible. Also, ensure that the Ethernet connection between your Linksys range extender and router is not loose.
Check the Power Supply
Chances are that the electrical outlet into which your Linksys range extender is damaged or fluctuated. To troubleshoot the issue in a flash, get the wall outlet fixed or plug your Linksys range extender into another working socket
Avoid Signal Interference
Another effective thing that you can do to get rid of “Linksys extender yellow light” issue is to keep it away from WiFi interference. Keep some below-mentioned points into consideration while placing your Linksys range extender:
- In reach of your existing router. Bear in mind, your router’s WiFi signals are very important for your Linksys range extender to function well.
- Do not place your extender in reach of Alexa/ WiFi devices
- Keep it away from windows, thick walls, doors, and security alarms
- Avoid placing the extender near to kitchen and gym
- Do not place baby monitors, gaming consoles, play stations, etc. in reach of your Linksys range extender
- Avoid hiding your Linksys range extender inside a cabinet. Also, do not keep the extender in a corner, beneath a table, back of any device, etc.
In accordance to the aforementioned points, can we hope that you now got a fix for “Linksys extender yellow light” issue?
Reset Your Linksys Range Extender
What, none of the aforementioned troubleshooting hacks help you resolve “Linksys extender yellow light” issue? If your answer is a big yes, consider performing factory reset.
Here is how you can reset your Linksys range extender to factory default settings:
Step 1: Do not unplug the Linksys device. But, do disconnect router and the extender, ok?
Step 2: Find the reset hole located on your Linksys range extender.
Step 3 Get hold of a pin, paper clip, or any sharp object to press and hold the Linksys range extender’s reset hole.
Step 4: Wait for a few minutes.
Step 5: Release it.
Step 6: Reconnect the devices i.e. router and extender.
After the Linksys range extender process comes to an end, perform Linksys range extender setup process again using default Linksys extender login details.
Wrapping Up
So, we are now going to end this article with this hope that the above-mentioned hacks help you resolve “Linksys extender yellow light” issue for you, don’t they?
