Common Steps to Fix Netgear Extender Keeps Rebooting Issue

Access to Mywifiext.net

The Netgear extender keeps rebooting issue has successfully ruined the internet-usage experience of many users owning wireless range extenders. In case you are also unable to make the most of your networking device despite doing new extender setup, then you should not think twice before taking a walk through the most common hacks given here. One of them will surely help you to pull yourself out of the mess that you are in right now.

[Fixed] Netgear Extender Keeps Rebooting Issue

  1. Avoid Signal Interference

The topmost reason why your Netgear wireless range extender keeps rebooting is because its signals are getting interrupted due to its improper location. Chances are that you have placed your networking devices near mirrors, microwave ovens, fish tanks, cordless phones, washing machines, treadmills, and televisions.

Taking this into consideration, you need to change the location of your extender. Once done, see if the issue at hand has hoped off of your back or not.

  1. Update Extender Firmware

Considering you are reading this hack, it means that the Netgear extender keeps rebooting issue is still troubling you. It might be because your networking device is not running on its updated version. To take care of this, the solution is quite simple; you need to update the firmware of your device right away by referring to the steps given in the user manual.

By the way, if you ever face the Netgear Powerline 1000 network extender white light issue after purchasing the same extender, the same hack can be implemented.

  1. Check the Electrical Socket

Have a look at the wall socket that has been given the responsibility of supplying power to your networking device. In case, you find out that it is damaged, then consider either calling up an electrician and getting the wall socket fixed or plugging your extender into another wall socket available in your house.

Now, check again if you are able to resolve the Netgear extender keeps rebooting issue. On the off chance, you are still facing it, following the next troubleshooting tip is needed.

  1. Pull the WiFi Devices Closer

Is too much distance separating your networking devices? Well then, it is a sign that you need to move them a little closer. Otherwise, the transmission of the signals between them will continue to happen in an improper manner. Make sure that you keep the Netgear wireless range extender in the same room where the router is kept.

Just make sure that you are not keeping the networking devices too close to each other. Or else, their signals will find a way to clash and cause more issues for you.

  1. Reset the Netgear Extender

If you are reading this troubleshooting hack, then it means that none of the aforementioned troubleshooting hacks help you to resolve the issue at hand. In that case, you are left with no other option than to restore your networking device to its default factory settings. In simple words, you need to reset your Netgear wireless range extender.

You can do as required by locating and pressing the Reset button on your Netgear range extender. Now, set up your networking device from scratch using any method that you like.

To Conclude

Hopefully, after walking through the troubleshooting hacks mentioned above, you will be able to resolve the Netgear extender keeps rebooting issue with ease. Which was the hack that helped you the most? Would you like to share your answer with your fellow readers? Nodding your head in yes? Well then, do share. You can make use of the comment section to do this very thing. Trust us; your fellow readers will appreciate the effort made by you.

Related posts